Rapid Movement Of Cursor In Outlook\word 2011 For Mac

I am visually impaired, and my Macs are a godsend. But after going from Leopard to Snow Leopard a couple weeks back, I have to ask. Did Apple break Voiceover on Safari? Specifically, when I have VO on in Safari, I want it to read what's under the mouse cursor.

Turned that on. I like going to Reddit and moving the cursor (giant pointer) over only the link titles to have them read to me. In Leopard, that's all that would be read, despite there being a thousand other little links throughout the page I wasn't concerned with VO locking on. Just the facts. Worked perfectly for 4 years.

Rapid Movement Of Cursor In Outlook Word 2011 For Mac

Unfortunately with Snow Leopard, it's treating every single thing on the page as if I want to read it. I could live with that, but a side effect of this extreme over-reaction is that sometimes when I move my mouse cursor from link to link, VO thinks I want to flip down the webpage to a random position below, making me lose my place almost constantly. When I dry to scroll back up the page to whatever link I was reading, it fights me and flips back down. I have turned on and off every single VO option in infinite combinations and cannot get VO to stop warping me down a page of links. Is this a glitch? I don't want to use the Rotor to cycle through the thousands of unimportant links on my Reddit homepage just to read the 100 links that I can already see normally but can't get VO to stay on.

Please help, as having links read to me saves my tired eyes. Being nonsensically warped hither and yon up and down a webpage so that I constantly lose my orientation on a simple list is nerve-wracking.

I use VoiceOver (VO) because I am a slow and inadequate reader (dyslexia), LIke you I use vision and the mouse to navigate and the VO to do rapid, effortless Aural Reading. I have had the same problem that you report here. I can't get VO to work as well in Safari web pages as it did under earlier versions of the operating system (OS), but I have got a work around that is tolerable. Under the earlier versions of MacOS and Safari, I could point with the mouse and the VO curser would follow where ever I put the mouse. This would let me, from where ever I was, switch over to keyboard navigation using the VO keys and arrow keys and navigate from that spot. This was great to use when I wanted to navigate through a list or a large page of paragraphs with out having to point to each item with the mouse.

I could move the the keyboard navigation mode and rapidly move forward, move back, or enter the text block. In this mode, VO would occasionally jump to the top of the page between some paragraphs or links, but it would jump back to where I was reading with the next command to 'read next', and this was not a problem. With the new OS this got all fouled up with the things you describe above, and I had to come up with a work-around. The work-around lets me use VO in Safari, but I have lost the functionality that I describe here. (Apple Accessibility, how can I get this functionality back with VO?) With the new OS, Safari and my work-around I can now read text without VO jumping away from my reading spot.

Here are the settings I have in my work-around. Under Navigation, I have (1) 'Initial position of VoiceOver cursor' set to Keyboard focused item, (2) 'Mouse cursor' set to Ignores VoiceOver cursor, (3) check (√) in check box for 'VoiceOver cursor follows insertion point', (4) all other boxes on this page are un-checked.

I think that #2 is the main change that stops the bouncing around. If this does not result in a tolerable work-around for you let me know and I can send you my VO preferences file, and you can try it out. I am currently using Mavericks, 10.9.4, and the workaround I reported earlier does not work. We are back to jumping around two previous sections on the page whenever the mouse is moved on a page. This is very problematic because I lose my place on the page when I move my mouse and the voiceover (VO) cursor jumps my page to some other section. Also, at times I cannot get to certain places on a page because the voiceover cursor keeps jumping me to the top of some section.

After this happens, I can scroll down to the paragraph, word, or button that I need to read, but as soon as I attempt to move the mouse over the text, or button, VoiceOver jumps me back to the top of that section. VO will not let me get to the part of the page that I need to read. In frustration, I usually turn VO off and use “Speak selected text when the key is pressed', but this is slow and laborsome. I will put up with it, but it is difficult to get my students to put up it. I first started experiencing this problem two or three years ago with Safari and had no problems with Mail, Pages, TextEdit, etc. However, the later versions of Mail and Pages appeared to be redesigned, and they are doing this same thing.

So far I’m not having the problem in TextEdit. Is there a workaround? I found a workaround by contacting Apple accessibility engineering.

The short answer is: A: set the mouse pointer option to 'Ignores VoiceOver cursor' in VoiceOver Utility Navigation. The long answer is: 8-16-14 While Engineering investigates, the customer can use VoiceOver to read text under the mouse without causing the window to scroll by enabling the option 'Speak text under the mouse after a delay' in VoiceOver Utility Verbosity Announcements, and setting the Mouse pointer option to 'Ignores VoiceOver cursor' in VoiceOver Utility Navigation. When visiting a new web page, VoiceOver will start reading from the top of the page, but this can be paused by pressing the Control key, then the customer can use the mouse to hover over text that they want VoiceOver to read. The amount of time it takes VoiceOver to start speaking the text under the cursor can be adjusted using the slider bar that appears under 'Speak text under the mouse after a delay' in VoiceOver Utility. Apple Footer. This site contains user submitted content, comments and opinions and is for informational purposes only. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums.

Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.

When I use the cursor keys or backspace/delete key to move the cursor in a text type field it takes for ever to move left or right and is jerky. This happens when I have the cursor in a Word doc, Excel cell, Safari and Chrome browser text boxes, Finder when editing a file name etc. It is really slow. The only way I can get the cursor to move faster is to keep tapping the keyboard delete key or a left or right cursor key. I have looked through Yosemite System Preferences but cannot find anyway to change the cursor movement speed, maybe I am missing the obvious. Even the Keyboard prefs do not seem to make a difference. Can anyone offer a solution?

I have 16 GB memory and I usually only have one app running at a time, sometimes I have Outlook or a few others running. But It does not matter whether I have 1 or 10 open, the effects are the same.

This issue started a few months ago and was OK until then. I does not matter how many apps I have open, it happens for instance with only Chrome or Safari open.

It has little if anything to do directly with Office apps. An example would be with Chrome open, when I go to a page like a forum, and click in the login ID box, the cursor appears in the box then the beach ball shows and starts its annoying spin and continues for about one minute, then it and the cursor in the login box disappear and I cannot click in the box for about another 30 seconds or so. If I open another tab with a different website, the same happens there.

The issue with Word or text fields (boxes) in a browser is that if I want to backspace using the delete key to delete a number of characters, if I hold the delete key down, the cursor erases one character then does not appear to erase any more, then when I release it, a bunch of characters get erased. The number of characters that get erased depends on how long I hold the delete key down.

It is annoying because I do not know how many have been erased until I release the key. To watch the characters get erased one at a time, I have to keep tapping the delete key, but even then the response is jerky. If I click in a text box or document and want to move the cursor left or right, I have to keep on tapping the cursor key, but again the movement is very jerky. If I hold the key down, the cursor moves one character then stops and does not appear to move and when I release it the cursor moves to a new position based upon how long I hold it down. It is actually moving but it does not move on the screen. The same happens if I want to move the cursor up or down.

Light Pole PNG & PSD images with full transparency. Over 200 angles available for each 3D object, rotate and download.| PixelSquid. Metal pole png pole light home design software for mac mac. Offer a FRP component for PLS-POLE and PLS-CADD. Both are industry leading software tools for the design and global analysis of utility poles and lines, as well as communications structures. PLS-POLE is the only software recommended by RS for structural analysis of RS poles.

This is just a few examples of the problem. It is really a very strange phenomenon.